 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
Can't find what you are looking for? Well, go back to the user site |
|
|
|
|
It appears that the Microval upgrade to RefleX kit has been shipping with the scan/done connector removed from the cable to facilitate snaking it through the wire harness. To reattach the Scan/Done wire to the connector, the 9 pin pinout is the following: Pin 1 Shield |
||
Please contact RefleXSupport with questions or comments. |
||